D-GB6 FUEL DISPENSER

D-GB6 FUEL DISPENSER

Pump Type: Optional

Inlet Pressure : >=54kPa.

Flow rate (L/min.): 55±5

Suction Distance (m) :6(verticalmente) / 50(orizzontalmente)

FlowMeter Type :Optional

Accuracy :±0.2%

Motor Voltage(V) :110V/220V/380V,50Hz/60Hz

Capacity(hp) :1HP(0.75kw)

Input Voltage : 110V/220V/380V,50Hz/60Hz

Nozzle: Auto Shut-off Nozzle

Environmental Condition:-40~~+55degree

Control Type :Solenold Vale Control Type

Preset : Function Provided(Small LCDIndicator)

Display(Counter) :Type LCD and Bright Backlight

Digit of Volume : 0~~999,999(6 Digits),Decimal point can be changed

Digit of Amount : 0~~999,999(6 Digits),Decimal point can be changed

Digit of Unit price : 0~~9999(4 Digits),Decimal point can be changed

Digit of Total Range : 0~~99,999,999,99

Optional Display :Type LCD and Bright Backlight

Digit of Volume : 0~~99,999,999(8 Digits),Decimal point can be changed

Digit of Amount :0~~99,999,999(8 Digits),Decimal point can be changed

Digit of Unit price : 0~~999999(6 Digits),Decimal point can be changed

Digit of Total Range : 0~~99,999,999,99

Totalizer: 1~~9,999,999

Hose:4.5m

Weight :385kg

Dimension(L×W×H) :1270 x 620 x 2420(mm)

Dimension(L×W×H)Of Qty of Container :40ft: 28 20ft: 13

sis to failure and trouble of fuel dispenser. Table 2-3: Troubleshooting of solenoid valve Serial No Phenomenon Reason(s) Judge methods Solution 1 No delivery, abnormal in winding of solenoid valve Winding is burned No suction after switch on Replace winding 2 Normally work with noise clean guiding valve, small flow valve and tighten iron core 3 Exterior leakage Tighten bolt or replace seal 4 Solenoid valve open after switch off Inner leakage clean guiding valve, small flow valve and membrane 5 Influx increased slowly at nozzle outlet as power on solenoid valve Clean guiding valve and control valve of small influx 6 No small flow rate in presetting filling Incorrect winding connection or guiding valve open Inspect connection, clean guiding valve, small flow valve and membrane 7 Small flow or no delivery in fuel dispenser Membrane or guiding valve don’t completely opened Clean or replace guiding valve, clean pipeline Article VII Hydraulic pipeline Hydraulic pipeline has two types of pipe and hole. The former, mainly connect fuel dispenser and tank, is characterized easy install and disassemble, benefiting to long delivery, however, the latter compact in size, light in weight, is used among hydraulic components. As different structures of parts manufactured by various factories, their connection methods are varied largely. Here introduce pipeline connection. 1. Pipeline connection between tank and fuel dispensers As fuel dispenser is connected with tank through pipe, any inappropriate installati fuel dispenser on would cause large troubles to fuel dispenser, such as no or difficult delivery, accuracy decline, big noise, etc. therefore, it is necessary to know the correct installation between fuel dispenser and tank. 1.1 Pipeline installation in negative pressure Pipeline installation and no delivery Sometime fuel dispenser with negative pressure has no delivery, which is not only relates to pump and relevant components, but also to the pip fuel dispenser eline between t fuel dispenser

.　　September 2005 IFSF - STANDARD FORECOURT PROTOCOL Version 1.33　　 CAR WASH SPECIFICATION　　 Page: 63 of 65　　 Mode 1A:　　 State 3 4　　 Idle Customer Entry　　 Event　　 4　　 Customer_Present　　 3　　 No_Customer　　 6 (via 5)　　 Release　　 Mode 1B:　　 State 3 4 5　　 Idle CustomerEntry Authorised　　 Event　　 4　　 Customer_Present　　 3　　 No_Customer　　 5　　 Self_Auth　　 6　　 Start　　 4　　 Auth_Time_Out　　 4　　 Block　　 Mode 2A:　　 State 3 fuel dispenser 4　　 Idle CustomerEntry　　 Event　　 4　　 Release　　 3　　 No_Customer　　 6 via 5　　 Start　　 Mode 2B:〠fuel dispenser fuel dispenser

r genes are active, so that other researchers could use it in the knowledge that it was complete. Admittedly the brain in question is a mouse brain. But the genes of mice and men correspond closely, as does much of their neuro-anatomy, and Dr Tonegawa is not proposing to carry out his experiments on people. He does, however, plan to put the map to use in a rather clever way. Many genes are actually switches that control the activity of other genes. By identifying particular switches that are active in only one part of the brain, he can co-opt those switches into activating his gene eliminator. Thus particular genes can be eliminated from one place without affecting others. That means he can shut down individual nervous pathways in the brain without affecting the others. This technique, which he has only just begun to use, will take the lesion method to a new level of refinement. Although anatomists can trace connections between various parts of the brain by following the axons, finding our what the connections are actually for is much harder. If Dr Tonegawa s technique works, such discoveries will be easier to make. The workings of the whole of the brain, not just the parts concerned with memory, will be laid bare. © 2006 .  About sponsorship As others see us Dec 19th 2006 From The Economist print edition Dealing with people changes our minds IN COUNTRIES where physical torture is illegal, the cruellest punishment that can be inflicted on an individual fuel dispenser is solitary confinement. The “I�that exists by itself will surely go mad. Indeed, many students of the field think the evolutionary pressure that drove the enlargement of the human brain was not a need to survive in the natural environment but a need to negotiate the social one. The most obvious human attribute is language, and that is meaningless if there is no one to talk to. Less obvious, but just as important, is the ability to th fuel dispenser ink oneself fuel dispenser