D-GC88 FUEL DISPENSER

D-GC88 FUEL DISPENSER

Pump :Type Optional

Inlet Pressure :>=54kPa.

Flow rate (L/min.): 55±5

Suction Distance (m) :6(verticalmente) / 50(orizzontalmente)

FlowMeter Type : Optional

Accuracy :±0.2%

Motor Voltage(V): 110V/220V/380V,50Hz/60Hz

Capacity(hp) :1HP(0.75kw)

Input Voltage : 110V/220V/380V,50Hz/60Hz

Nozzle :Auto Shut-off Nozzle

Environmental Condition : -40~~+55degree

Control Type :Solenold Vale Control Type

Preset :Function Provided(Small LCDIndicator)

Display(Counter) :Type LCD and Bright Backlight

Digit of Volume : 0~~999,999(6 Digits),Decimal point can be changed

Digit of Amount :0~~999,999(6 Digits),Decimal point can be changed

Digit of Unit price: 0~~9999(4 Digits),Decimal point can be changed

Digit of Total Range : 0~~99,999,999,99

Optional Display :Type LCD and Bright Backlight

Digit of Volume :0~~99,999,999(8 Digits),Decimal point can be changed

Digit of Amount :0~~99,999,999(8 Digits),Decimal point can be changed

Digit of Unit price : 0~~999999(6 Digits),Decimal point can be changed

Digit of Total Range : 0~~99,999,999,99

Totalizer: 1~~9,999,999

Hose :4.5m

Weight :450kg

Dimension(L×W×H): 1615 X 620 X2420(mm)

Dimension(L×W×H)Of Qty of Container :40ft: 26

e hydraulic pulse so a fuel dispenser s to increase inner discharge of measurement transducer, affecting fuel dispenser’s accuracy. The incorrect pipeline installation makes the whole hydraulic system much unstable fuel dispenser --- pressure pulse increases. As higher oil temperature or vacuum pressure, oil viscidity will reduce, affecting measurement transducer in two facets. One is to increase inner leak, the other is to decline the stability of hydraulic system. From above analysis, it is known that high vacuum pressure of pump inlet is not always good for fuel dispenser’s normal operation. One pipe connect to several fuel dispensers Some filling stations, in order to reduce installation cost, adopt one pipe to connect several fuel dispensers, which is very unscientific. In this type of installation there would be brought two facets of troubles: one is that, as some fuel dispensers stop operations, some still work, air would be suck from stopped dispensers so as to affect the accuracy of working fuel dispensers. The other trouble is that if several fuel dispensers work at same time, there would be mutually interfering, increasing flow pulse and inner leakage so as to affect accuracy. 1.2 Pipeline installation in positive pressure Delivery oil through positive pressure refers to in delivery process the inlet of fuel dispenser is positive pressure, which is adopted in the following situations. One is that delivery oil from high position tank, the other situation is tat adopt submersible pump in tank to delivery oil to fuel dispenser. The latter situation is more often. The Article 6.2.6 in GB50156-2002 the Design and Construction of Vehicle Filling station stipulated that if several fuel dispensers adopt same one pipe, each is affected and lead to uneven influx. Therefore, in order to ensure accuracy, the pipeline between fuel dispenser and tank should scientifically design and installation, using as few as elbow, keeping inner wall smooth of pipe. These are beneficial to reduce pressure and electricity loss, and to decl fuel dispenser

(0-255)　　 fuel dispenser To allow the CD to specify the type of W M security　　 method used in the transaction data.　　 0 = no security type.　　 1 = security type a fuel dispenser s defined in the IFSF Bulletin:　　 Dispenser CRC Signature Generation.　　 PCD Comment:　　 As this Data_Id is a unique Data_Id to the IFSF　　 Dispenser application protocol it is very unlikely that a　　 proprietary pump protocol will support this feature.　　 Hence any W M algorithms will be implemented in the　　 PCD and not the pump. So this Data_Id will have to set by　　 the PCD to reflect the W M security type it is utilising　　 internally.　　 58 bcd12 R(1-9) M　　 Protocol_Ver　　 (3AH)　　 To allow the CD to interrogate the version number of the　　 protocol being used by the dispenser. The Protocol_Ver　　 number format is 9999999999.99 .　　 PCD Comment:　　 This Data_Id should be set to the IFSF Dispenser　　 Application protocol version number being used by the　　 PCD to communicate with the Site ControllerCD.　　 59 Date R(1-9) M　　 SW_Change_Date　　 (3BH) W(1-2)　　 To allow the CD to interrogate the date of the installation　　 of the currently installed software.　　 PCD Comment:　　 This Data_Id should be set to the date when the PCD s　　 software was last changed.　　 60 Bcd14 R(1-9) M　　 SW_Change_Personal_Nb　　 (3CH) fuel dispenser

he Slovak special envo fuel dispenser y for the European Union. He has suggested that any referendum must be endorsed by 55% of those voting; and that, to be valid, at least 50% of the electorate mu fuel dispenser st take part. The EU s foreign ministers have backed Mr Lajcak s proposal. Polls suggest that independence is supported by around 41% of Montenegrins and opposed by 32%. Since Mr Lajcak s plan first became public, Montenegrins have become keen mathematicians. The referendum may produce a slim majority for independence, but much will depend on turnout. Yet if the vote in favour is just 54.9%, says Dragan Koprivica, spokesman for the pro-union Socialist People s Party, the government “would not have the right to promote an independent country.� Pro-independence politicians are seething about the Lajcak plan. They say it is undemocratic, since it means that a pro-union vote is worth more than a pro-independence one. Montenegrin officials also complain that they were blackmailed by the EU, which insisted that, unless they accepted the Lajcak plan, itwould not allow monitoring of the referendum by the Organisation for Security and Co-operation in Europe, undermining the vote. Miodrag Vlahovic, Montenengro s foreign minister, declares that, if there is even a one-vote majority in favour of independence, “it is absolutely clear, the state union will not exist any more.�The implication is that Montenegrins who participate in joint institutions with Serbia, such as the army and the foreign ministry, would be recalled. Mr Koprivica says that his party activists report that Mr Djukanovic s people are offering ¬150 ($180) bribes to secure votes. But the pro-union party has an uphill struggle of its own its members are mostly old and its leaders are linked to the ugly face of Serbian nationalism. Pro-independence supporters joke that officials from Brussels act as thoug fuel dispenser