K-GAQ FUEL DISPENSER

K-GAQ FUEL DISPENSER

FlowMeter :Type :Optional

Accuracy :±0.2%

Pressure Loss (kg/cm):Under 0.25

Motor Voltage(V):110V/220V/380V,50Hz/60Hz

Capacity(hp):1HP(0.75kw)

Input Voltage :110V/220V/380V,50Hz/60Hz

Nozzle :Auto Shut-off Nozzle

Environmental Condition : -40~~+55degree

Control Type :Solenold Vale Control Type

Preset :Function Provided(Small LCDIndicator)

Display(Counter):Type:LCD and Bright Backlight

Digit of Volume :0~~999,999(6 Digits),Decimal point can be changed

Digit of Amount :0~~999,999(6 Digits),Decimal point can be changed

Digit of Unit price :0~~9999(4 Digits),Decimal point can be changed

Digit of Total Range :0~~99,999,999,99

Optional Display:Type:LCD and Bright Backlight

Digit of Volume :0~~99,999,999(8 Digits),Decimal point can be changed

Digit of Amount :0~~99,999,999(8 Digits),Decimal point can be changed

Digit of Unit price :0~~999999(6 Digits),Decimal point can be changed

Digit of Total Range :0~~99,999,999,99

Totalizer:1~~9,999,999

Hose:4.5m

Weight :280kg

Dimension(L×W×H) :1180*650*2020(mm)

Dimension(L×W×H)Of Qty of Container :40ft: 29

ents on metrological management. The chapter briefly introduces fuel dispenser’s metrological management and technical requirements, appraisal related and attentions. Article I Metrological management and technical requirements In accordance with The Law on Metrology of fuel dispenser’s legal management mainly includes following aspects: Model approval, initial approval, subsequent appraisal and inspection in operation. Model approval refers to an entire test, examination and assessment as to new model’s entire performance. Initial approval refers to assess whether or not the fuel dispenser made by manufacturer in accordance with the model having been ratification through a series of testing, as well as metrological performance with relative metrological rules and regulations. Initial approval really has two phases �- approval combined with factory test, and testing appraisal after installation. Subsequent appraisal is cond fuel dispenser ucted after long time since initial appraisal, from which considerable appraisal period is set down according to related requirements. Periodical appraisal is also regarded as the continued subsequent appraisal. Fuel dispenser’s measurin fuel dispenser g performance within appraisal period needs to be examined, so filling station should deploy self-check standard instrument (no less than 20L) to examine and inspect. Apart from applied to fuel dispenser approval, JJG443-98 also adapt sample testing and pattern evaluation. Although there are two items of accuracy and flow distance ratio conducted in initial approval and subsequent evaluation, there are other technical parameters different from approval as for fuel dispenser made after passing pattern evaluation, including minimum calculated volume and minimum cubic variable. Several items reference to the pattern evaluation and sampling testing of mechanical hydraulic section of fuel dispenser as followed: Accuracy testing The testing’s purpose is to define the flow curve and verify the tolerance scope in which the allowed maximum tol fuel dispenser

options;　　 E.g. the purchase will be debited or a revolving will be applied? An input from the customer is necessary　　 in that case.　　 E.g. getting kilometres driver-id vehicle-id etc.　　 Host identification: which authorisation centre should be considered (knowing the Issuer it is not　　 necessarily the same: e.g. some VISA could be switched to an Acquirer some to another)　　 Host specific activity: depending on the host there might be something else besides the issuer specific　　 inputoutput. Other specific actions might be necessary:　　 e.g. in case of off-line　　 e.g. minimummaximum amount　　 e.g. the card is entitled for that kind of purchase (e.g. OPTCRIND)?　　 Host specific protocol: depending on the host the correct protocol is used to get the response.　　 InputOutput on card operation mainly with the customer.　　 E.g. Eft Receipt print.　　Referring to the fuel dispenser EMV standard the EPS application manages:　　 Application selection　　 Processing options　　 Data and Card authentication　　 Processing restrictions　　 Cardholder verification　　 fuel dispenser Terminal risk management　　 Terminal action analysis　　 Card action analysis　　 On-line processing (authorisation and data capture)　　August 2002 IFSF STANDARD FORECOURT PROTOCOL FP319_1.00　　 EPS POS INTERFACE SPECIFICATION　　Page 10 of 146　　 Fall-back procedures　　 Script processing　　Because the Loyalty scheme is managed by EPS in case of off-line awarding the table of product groups　　the algorithm for point calculation etc. are managed by EPS application without affecting the POS　　application.　　Similarly any possible product group table that might be linked to service codes and purchase category if　　not manage fuel dispenser

khina, 70% of new female patients contract HIV from sex. The immediate result of all this is a huge toll of tragic and needless early deaths. But its health and demographic malaise will also warp Russia s future. The army is struggling to find as many healthy recruits as Russian generals say they need. The population is ageing and sickening behind the headline death rates is a secondary plague of incapacity. The workforce is shrinking. Yet, as a racist bombing at a Moscow market last month and a near-pogrom against Caucasians in a northern town this week both suggest, Russians are ill-disposed towards the new immigrants their economy increasingly needs. Some, including Mr Putin, have gone so far as to prophesy the death of the nation itself. In Irkutsk the big fear is the “yellow peril� As people quit cities that should never have existed, the population of Siberia and the Russian far east has shrunk faster than the re fuel dispenser st of the country s. Those who remain fret about Chinese hordes swarming across the border, intent on annexation. “They work for kopeks and live ten to a room,�complains Alexander Turik, an Irkutsk extremist, also alleging that Chines fuel dispenser e men are paid to marry Russian women. Even some Chinese worry Changa, a long-term trader in the Irkutsk market known as Shanghai, grumbles that recent arrivals are damaging business. It is an ancient Russian anxiety, though probably an irrational one. Many of the Chinese, like Changa, are shuttle traders rather than colonisers. Still, even if fears of Russia s dismemberment are fanciful, its demographic course will render it a different country, and probably a more ungovernable one. That, plus Russia s incubation of assorted epidemics, ought to be a worry for other countries too. Alas, persuading Russia and the Russians to change their ways has never been easy. © 2006 .  About sponsorship Lake Baikal Still blue Sep 7th 2006 | OLKHON ISLAND From fuel dispenser