P-G FUEL DISPENSER

P-G FUEL DISPENSER

Pump Type :Optional

Inlet Pressure:>=54kPa.

Flow rate (L/min.) :55±5

Suction Distance (m): 6(verticalmente) / 50(orizzontalmente)

FlowMeter Type : Optional

Accuracy :±0.2%

Motor Voltage(V) :110V/220V/380V,50Hz/60Hz

Capacity(hp) :1HP(0.75kw)

Input Voltage : 110V/220V/380V,50Hz/60Hz

Nozzle : Auto Shut-off Nozzle

Environmental Condition : -40~~+55degree

Control Type :Solenold Vale Control Type

Preset : Function Provided(Small LCDIndicator)

Display(Counter) :Type LCD and Bright Backlight

Digit of Volume : 0~~999,999(6 Digits),Decimal point can be changed

Digit of Amount :0~~999,999(6 Digits),Decimal point can be changed

Digit of Unit price : 0~~9999(4 Digits),Decimal point can be changed

Digit of Total Range : 0~~99,999,999,99

Optional Display Type :LCD and Bright Backlight

Digit of Volume : 0~~99,999,999(8 Digits),Decimal point can be changed

Digit of Amount :0~~99,999,999(8 Digits),Decimal point can be changed

Digit of Unit price : 0~~999999(6 Digits),Decimal point can be changed

Digit of Total Range : 0~~99,999,999,99

Totalizer: 1~~9,999,999

Hose: 4.5m

Weight : 205kg

Dimension(L×W×H) : 1060*550*1620(mm)

Dimension(L×W×H)Of Qty of Container : 40ft: 44 20ft: 22

other part of pipeline. 3.4. Important notices to maintenance Switch off the power supply to ensure safety; repairing a container to collect pipe oil. Carefully protect the joint face in case that waste goes into inner part when disconnecting and reassembly. Clean all components before reassembly. The tightness of bolt of upper cover should be even, installed catercorner. It is suggested to adapt even strength to install other bolts and nuts in case to damage the thread of frame. Article III Measurement transducer The fuel dispenser adapts cubage flow meter composed of measurement transducer and indicator device in accordance with the stipulation of metrological regulations on fuel dispenser of P.R.C.JJG443. Measurement transducer convert the cubage signal of oil passed over into digital signal, then into pulse signal v fuel dispenser ia electric sensor. Finally, transmitting pulse signal to indicator device in where the oil volume passed over measurement transducer is indicated. Flow meter generally includes two parts--- measurement and indication, but it is often regard flow meter only has measurement function before the new appraisal regulations promulgation. Obviously, the new regulation is more scientific and accurate in the definition of measurement transducer. Measurement transducer is core component of fuel dispen fuel dispenser ser. The most basic and important technical parameters are measure accuracy, environmental adaptability and reliability. Its performance depends upon structure parameter design, material choice and manufacturing quality. The correctly usage and maintenance of course are the important condition for measurement transducer operation. Domestic fuel dispenser manufacturers now adapt two kinds of measurement transducers that divided by the model of piston. The following will introduce these two kinds ---- metal-piston measurement transducer and soft-piston measurement transducer. Metal-piston measurement transducer This kind of measurement transducer is adapted by most of manufacturer of fuel di fuel dispenser

€ To allow the CD to instruct the car wash to perform a line　　 blow out.　　 0 = Blow out is under car wash control　　 1 = Tell the car wash to blow out the lines　　 BAY CLEANING CONTROL DATA　　 BayCleaningControl　　 100 bin8 R(1-9) O　　 (64H) (0-1) W(1-9)　　 To allow the CD to instruct the car wash to turn onoff bay　　 cleaning.　　 0 = Bay cleaning control is under car wash control　　 1 = Tell the car wash to turn on bay cleaning　　 MANUFACTURER OIL COMPANY SPECIFIC　　 200　　 to Free to the manufacturer oil company　　 255　　3. fuel dispenser 4 Meter Data　　3.4.1 Meter Data　　This data allows the CD to configure a meter in the calculator. A meter is used to monitor the　　usage of programmes or options.　　The access to the meter data is done by the database address PG_ID and OP_ID.　　The PG_ID = 80H is used to ask for all programme meters.　　The OP_ID = 90H is used to ask for all option meters.　　Please note that to allow car washes to operate in stand alone mode the car wash must have　　default fuel dispenser settings for some of the DataID s contained in this database. i.e. the car wash must　　configure these DataID s itself after a master resetcold start.　　The meters are predefined as 81H to 8FH for PG_ID 1 to 15 and meters 91H to 9FH for　　OP_ID 1 to 15.　　 METER DATABASE　　 Programme Meters DB_Ad = PG_ID (81H 8FH)　　 Option Meters DB_Ad = OP_ID (91H 9FH)　　Version 1.33 IFSF - STANDARD FORECOURT PROTOCOL September 2005　　 CAR WASH SPECIFICATION　　Page: 34 of 65　　 Data fuel dispenser

t it “ranks with the Declaration of Independence and the United States Constitution as a seminal text� As highly vulnerable newcomers, the Pilgrims were careful to establish diplomatic relations with the local Indians. The natives numbers were down they were just recovering from a massive outbreak of disease, probably passed on by European traders. Mutual suspicion was held in check. The Pilgrims paid back the pilfered corn, and they also secured an invaluable interpreter, Squanto. In 1621, Indian guests outnumbered Pilgrims at the first Thanksgiving (which did not get its name until centuries later). They brought five newly killed deer to the feast which, if it had truly indulged the Pilgrims tastes, should also have featured plenty of beer. The deterioration of English-Indian relations in New England forms the cor fuel dispenser e of Mr Philbrick s tale. This is a huge topic, and it takes him ever further from his original Mayflower subjects. It was the godly settlers that drew the first serious blood. Fearful of attack by some tribes further afield, Miles Standish, the Pilgrims hot-blooded military leader, led a pre-emptive strike that terrorised the Indians. Pressure on land was mounting. Tens of thousands of Puritans, who were religiously akin to the Pilgrims, reached America in the 1630s and 1640s, clusteri fuel dispenser ng in Massachusetts Bay and Connecticut. The Indians were squeezed into ever smaller spaces as the English convinced them to sell their land. Dartmouth, Mr Philbrick reports, went for �0 yards of cloth, eight moose skins, 15 axes, 15 hoes, 15 pairs of shoes, one iron pot, and ten shillings worth of assorted goods� Tensions culminated in the bloody King Philip s War (1675-76). Though the conflict started in Plymouth, it swept up much of New England (Plymouth was in any case sliding towards insignificance because of its lack of a decent anchorage). Slaughter was rampant on both sides. Close to half of New England s towns were torched. Huge numbers of Indians died, from disease fuel dispenser