P-GA FUEL DISPENSER

P-GA FUEL DISPENSER

Pump Type: Optional

Inlet Pressure :>=54kPa.

Flow rate (L/min.) :55±5

Suction Distance (m) :6(verticalmente) / 50(orizzontalmente)

FlowMeter Type : Optional

Accuracy :±0.2%

Motor Voltage(V) :110V/220V/380V,50Hz/60Hz

Capacity(hp) :1HP(0.75kw)

Input Voltage : 110V/220V/380V,50Hz/60Hz

Nozzle :Auto Shut-off Nozzle

Environmental Condition : -40~~+55degree

Control Type: Solenold Vale Control Type

Preset :Function Provided(Small LCDIndicator)

Display(Counter) :Type LCD and Bright Backlight

Digit of Volume : 0~~999,999(6 Digits),Decimal point can be changed

Digit of Amount :0~~999,999(6 Digits),Decimal point can be changed

Digit of Unit price :0~~9999(4 Digits),Decimal point can be changed

Digit of Total Range :0~~99,999,999,99

Optional Display :Type LCD and Bright Backlight

Digit of Volume : 0~~99,999,999(8 Digits),Decimal point can be changed

Digit of Amount : 0~~99,999,999(8 Digits),Decimal point can be changed

Digit of Unit price :0~~999999(6 Digits),Decimal point can be changed

Digit of Total Range :0~~99,999,999,99

Totalizer: 1~~9,999,999

Hose :4.5m

Weight : 280kg

Dimension(L×W×H): 1060*550*1620(mm)

Dimension(L×W×H)Of Qty of Container : 40ft: 44 20ft: 22

As past over long service time, parts abrasion universally or cylinder severely damaged, a new measurement transducer should be installed to replace old one. As find exterior leakage, firstly inspect the bolts corresponding to leak section. Tightly screw loose bolts, if leakage is contin fuel dispenser ued, disconnect and inspect the seal ring and gasket relative section. Substitute aging or damaged parts and reassemble. Apart from the above reasons of extensive colloid and surface abrasion, these trouble also cause abnormal operation of measurement transducer, such as position pin fall down from piston or deformation, small axis lost on upper and lower connecting rod, loose bolt between piston and connecting rod. The solution is that disassembling measurement transducer, replace damaged or unqualified components and reassemble. The products made in normal factory seldom appear these troubles. Since measurement transducer is core component of fuel dispenser, elaborate machining, disconnection and reassembly should be as careful as possible. All elements should be cleaned before reassembly, excluding water into inner. Bolts are tightened even and appropriately. Soft-piston measurement transducer As t fuel dispenser hese merits --- small in size, light weight, beautiful appearance, high accuracy, piston exchangeable--- soft-piston measurement transducer is widely adapted in domestic fuel dispenser market. It generally involves two structures: four-piston structure and double-piston structure. The latter model is selected universally. Therefore, this article will introduce the structure, working principal and maintenance of four- piston measurement transducer. Structure Diagram 2-20 and Diagram 2-21 show the cutaway view and exploded drawing of four-piston measurement transducer that is widely employed. The transducer mainly consists of sealed cover, upper subassembly, export axis, frame subassembly, piston subassembly, connecting rod and top cover, clearly presenting in Diagram 2-20 and Diagram 2-21. Diagram 2-20: Cutaway view fuel dispenser

wing quality objectives. The quality objectives　　need to be consistent with the quality policy and the commitment to continual improvement and their　　achievement needs to be measurable. The achievement of quality objectives can have a positive impact on　　product quality operational fuel dispenser effectiveness and financial performance and thus on the satisfaction and confidence　　of interested parties.　　2 ? ISO 2005 All rights reserved　　 ISO 9000:2005(E)　　 NOTE Statements in parentheses do not apply to ISO 9001.　　 Figure 1 Model of a process-based quality management system　　2.6 Role of top management within the quality management system　　Through leadership and actions top management can create an environment where people are fully involved　　and in which a quality management system can operate effectively. The quality management principles (see　　0.2) can be used by top management as the basis of its role which is as follows:　　a) to establish and maintain the quality policy fuel dispenser and quality objectives of the organization;　　b) to promote the quality policy and quality objectives throughout the organization to increase awareness　　 motivation and involvement;　　c) to ensure focus on customer requirements throughout the organization;　　d) to ensure that appropriate processes are implemented to enable requirements of customers and other　　 interested parties to be fulfilled and quality objectives to be achieved;　　e) to ensure that an effective and efficient quality management system is established implemented and　　 maintained to achieve these quality objectives;　　f) to ensure the availability of necessary resources;　　g) to review the quality management system periodically;　　h) to decide on actions regarding the quality policy and qua fuel dispenser

may well favour the brave, but in America it increasingly leans towards the foolhardy, reckless and criminal. On September 30th Congress rushed through a bill to stop banks and credit-card companies from processing payments to online gambling companies. The bill, tacked onto legislat fuel dispenser ion tightening port security, could be signed into law shortly by George Bush. It is aimed at choking off the flow of American funds to a fast-growing, if illegal, industry that took some $12 billion in bets worldwide last year, half of which are thought to have been placed by Americans. The immediate effect was to send an entire industry into a spin as the share prices of online gambling firms crashed. Many now plan to concentrate on European and Asian gamblers. But America s actions are unlikely to produce the results desired by politicians. Online gambling seems unstoppable and prohibition can be easily circumvented. This could drive online gambling into darker and more dangerous corners for Americans, even as punters in other countries are protected. The American Gaming Association, which represents the big casino groups, reckons some 4% of Americans, or about 12m people, gambled online last fuel dispenser year. That does not seem like many when one in four Americans visited offline casinos. But the number of Americans gambling online has doubled over the past year. Some studies suggest that a quarter of male college students now play card games online at least once a month. This burgeoning American love of internet gambling fuelled the industry. The first online casinos started taking bets in the mid-1990s and by 1999 estimates suggested there were over 400 gambling websites. It could now be 3,000. PartyGaming, the biggest by market value, was founded in 1997 by Ruth Parasol, an American lawyer with a colourful business background. The firm took off in 2002 after it developed proprietary software that allowed punters to play poker with each other over the internet. Poker was the big breakthrough for internet ga fuel dispenser